Friends who wear eyeglasses often have to clean the eyeglasses to ensure the flatness of the eyeglasses. The easiest way is to wipe with eyeglasses cloth. This method is acceptable for eyeglasses with glass lenses, but not for the resin lens glasses that are very popular nowadays. Too suitable, because the hardness of the resin lens is much worse than that of the glass lens. If you are not careful, the lens may be scratched, which will affect the use of the eyeglasses. So how to clean and maintain resin lens eyeglasses? Let me tell you how to clean and maintain your resin lens eyes. I hope it will help you.
First rinse the glasses with clean water
Turn on the faucet, let the water have a certain pressure, and rinse the plexiglass under the faucet. First, rinse one side of the lens, and then rinse the other side of the lens. The purpose is to wash away the dust and sand on the surface of the lens and avoid scratching the surface of the lens.
Clean the lenses with soap or detergent
Apply detergent or soap to both sides of the eyeglasses that have been rinsed with water, pinch both sides of the lens with your thumb and index finger, and wipe the lens clockwise or counterclockwise until the detergent or soap is evenly applied to both sides of the lens. Wipe both The lens method is the same.
Rinse the foam on the surface of the lens with water
After wiping the surface of the lens with foam, turn on the faucet and wash the lens with water while washing the lens with your thumb and forefinger until the surface of the lens is no longer smooth and the lens is clean and translucent. You can turn off the faucet.
Shake the water droplets on the lens vigorously
After washing the lenses with clean water, fold up the temples, pinch the temples with your thumb and index finger, press the middle finger in the middle of the frame, and shake off the water droplets on the eyeglasses. You will find that there is still a lot of fine powder on the lens after the fall. Small drops of water, the cleaning has not yet been completed at this time.
Use a clean glasses cloth to absorb the small water droplets on the lenses
The small water droplets on the lens should not remain on the lens, otherwise the water droplets will leave water marks on the surface of the lens after air drying, which will affect the use. At this time, take out the prepared clean eyeglasses cloth and gently suck off the small water droplets on the eyeglasses. At this point, the cleaning and maintenance of the lens is complete.
Clean the spectacle frames and temples
Wipe the frames and temples gently with the eyeglasses cloth. Usually, the frames and temples are basically clean after rinsing with water. Be careful not to rub the lens when wiping to ensure that the lens will not be contaminated again. So far, the cleaning and maintenance work of resin lens glasses is completed.
The above is my daily cleaning and maintenance of eyeglasses, I hope it will be helpful to you who love eyeglasses.